DEVELOPING STANDARDS

Specialists of the standardization department at the All-Union Research and Development Centre for Transportation Technology help to design interstate and national standards for freight rolling stock, taking account of the current level of development of railcar construction and relevant spheres of science and technology.

 

The Centre has designed the following standards:

 

 The following standards

  • GOST 34385–2018. Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications (authorized on 01.12.2018 by Order No. 275-st of the Federal Agency for Technical Regulation and Metrology, dated May 24, 2018)

 

  • GOST 34387–2018. Side bearings for freight cars bogies. General specifications (authorized on 01.12.2018 by Order No. 276-st of the Federal Agency for Technical Regulation and Metrology, dated May 24, 2018)

 

  • GOST 34458–2018. Hinge couplings with cast linkage and center-plate components for articulated freight cars. Main technical specifications (authorized on 01.06.2019 by Order No. 759-st of the Federal Agency for Technical Regulation and Metrology, dated October 12, 2018)

 

  • GOST 34468–2018. The center plates of the freight wagons for 1520 mm gauge railways. General specifications (authorized on 01.07.2019 by Order No. 932-st of the Federal Agency for Technical Regulation and Metrology, dated November 07, 2018)

 

  • GOST 34503–2018. Friction wedges of freight car bogies. General specifications (authorized on 01.08.2009 by Order No. 1154-st of the Federal Agency for Technical Regulation and Metrology, dated December 25, 2018)

 

  • GOST 34632–2020. Freight cars. Method of reliability operational tests (authorized on 01.09.2020 by Order No. 40-st of the Federal Agency for Technical Regulation and Metrology, dated February 11, 2020)

 

  • GOST 34697–2020. End valves and disconnecting valves. Main technical specifications (authorized on 01.05.2021 by Order No. 1328-st of the Federal Agency for Technical Regulation and Metrology, dated December 18, 2020)

 

  • GOST 34763.1–2021. Bogies for three- and four-axle rail freight cars. Main technical specifications (authorized on 01.02.2022 by Order No. 1063-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 34763.2–2021. Bogies for three- and four-axle rail freight cars. Acceptance rules and test methods (authorized on 01.02.2022 by Order No. 1064-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 34764–2021. Dump cars. Requirements to structural straight and dynamic qualities (authorized on 01.02.2022 by Order No. 1065-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 34765–2021. Bunker-type freight cars. Main technical specifications (authorized on 01.02.2022 by Order No. 1066-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 34772–2021. Transporter cars. Requirements to structural straight and dynamic qualities (authorized on 01.02.2022 by Order No. 1067-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 34759–2021. Railway rolling stock. Normative limits of railway track interaction and test methods  (authorized on 01.02.2022 by Order No. 1068-st of the Federal Agency for Technical Regulation and Metrology, dated October 06, 2021)

 

  • GOST 9238–2013. Construction and rolling stock clearance diagrams (authorized on 01.05.2024 by Order No.1461-st of the Federal Agency for Technical Regulation and Metrology, dated December 09, 2022)

 

  • GOST 26725–2022. Freight gondolas. General technical specifications (authorized on 01.06.2024 by Order No. 1619-st of the Federal Agency for Technical Regulation and Metrology, dated December 27, 2022)

 

  • GOST 26686–2022. Flat cars. General technical specifications (authorized on 01.06.2024 by Order No. 1618-st of the Federal Agency for Technical Regulation and Metrology, dated December 27, 2022)

 

  • GOST 10674–2022. Tank cars. General technical specifications (authorized on 01.06.2024 by Order No. 1616-st of the Federal Agency for Technical Regulation and Metrology, dated December 27, 2022)

 

  • GOST 10935–2022 Box cars. General specifications (authorized on 01.06.2024 by Order No. 1617-st of the Federal Agency for Technical Regulation and Metrology, dated December 27, 2022)

 

  • GOST 5973–2022. Dump cars. General technical specifications (authorized on 01.06.2024 by Order No. 1615-st of the Federal Agency for Technical Regulation and Metrology, dated December 27, 2022)

 

  • GOST 35006–2023  Air reservoirs for brake systems of freight cars. General specifications (authorized on 28.02.2025 by Order No. 1112-st of the Federal Agency for Technical Regulation and Metrology, dated October 11, 2023)

 

  • GOST 35024–2023. Freight cars of articulated type. General specifications (authorized on 20.04.2025 by Order No. 1328-st of the Federal Agency for Technical Regulation and Metrology, dated November 03, 2023)

 

  • GOST R 70488–2022. System of development and launching into manufacture. Railway rolling stock. The procedure for the development of repair documents and preparation of repair (authorized on 01.05.2023 by Order No.1373-st of the Federal Agency for Technical Regulation and Metrology, dated November 25, 2022)

 

  • PNST 190–2017. Freight cars. Method for the conduct of dynamic tests and tests of impact on rail track using a tensometric wheel pair (authorized on 01.02.2018 by Order No. 5-pnst of the Federal Agency for Technical Regulation and Metrology, dated June 13, 2017)

 

  • PNST 357–2019. Braking system of freight cars bogie. Technical requirements and test methods (authorized on 01.01.2020 by Order No. 26-pnst of the Federal Agency for Technical Regulation and Metrology, dated July 25, 2019)

 

  • PNST 364–2019. Automatic coupling device with a coupler CA-3T of freight railcars running on 1520 mm gauge railways. Specifications (authorized on 01.01.2020 by Order No. 34-pnst of the Federal Agency for Technical Regulation and Metrology, dated September 18, 2019)

 

  • PNST 511–2020. Freight cars. Design irregularities of the railway track for use in dynamic qualities estimation of freight cars (authorized on 01.06.2021 by Order No. 125-pnst of the Federal Agency for Technical Regulation and Metrology, dated December 31, 2020)

 

The amendment

  • Amendment №1 GOST 9246–2013. Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specification (authorized on 01.10.2018 by Order No.399-st of the Federal Agency for Technical Regulation and Metrology, dated July 6, 2018)

 

  • Amendment No.1 GOST 15.902–2014. System of development and launching into manufacture. Railway rolling stock. Procedure of development and launching into manufacture (introduced from 01.03.2019 by the Order of the Federal Agency for Technical Regulation and Metrology dated 27 November 2018 No. 1034-st)

 

  • Amendment No2 GOST 4686–2012. Brake beams of brake leverage gear of freight cars. Specifications (introduced from 1 April 2021 by the Order of the Federal Agency for Technical Regulation and Metrology dated 10 March 2021 No. 127-st)

 

  • Amendment No1 GOST 34468–2018. The center plates of the freight wagons for 1520 mm gauge railways. General specification (introduced from 01.07.2021 by the Order of the Federal Agency for Technical Regulation and Metrology dated 28 May 2021 No. 485-st)

 

  • Amendment №1 GOST 34385–2018. Axle-boxes and adapters for wheelsets of freight wagon bogies. General specification (authorized on 01.06.2022 by Order No. 132-st of the Federal Agency for Technical Regulation and Metrology, dated March 16, 2022)

 

  • Amendment №2 GOST 9246–2013. Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specification (authorized on 01.12.2022 by Order No.993-st of the Federal Agency for Technical Regulation and Metrology, dated September 26, 2022)

 

  • Amendment №1 GOST 33211–2014. Freight wagons. Requirements to structural strength and dynamic qualities (authorized on 01.02.2023 by Order No.1442-st of the Federal Agency for Technical Regulation and Metrology, dated December 02, 2022)

 

  • Amendment №1 GOST 33788–2016. Freight and passenger railcars. Methods of testing structural strength and dynamic performance (authorized on 01.09.2022 by Order No.414-st of the Federal Agency for Technical Regulation and Metrology, dated May 30, 2022)

 

  •  Amendment №1 GOST 34503–2018 Friction wedges of freight car bogies. General specifications (authorized on 01.09.2023 by Order No.146-st of the Federal Agency for Technical Regulation and Metrology, dated March 15, 2023)